Table of Contents
Advertisement
Displaying the picture
1. Make sure that the signal source is sending the signal to the
projector.
2. Use the VOLUME +/- buttons to adjust the volume. To have the
projector silent, press the MUTE button on the remote control.
3. Press the INPUT button on the projector.
Each time you press the button, the projector switches its input
port in turn.
4. Press the ASPECT button on the remote control. Each time you
press the button, the projector switches the mode for aspect ratio
in turn.
5. Use the zoom ring to adjust the screen size.
6. Use the focus ring to focus the picture.
7. Use the vertical lens shift dial to shift the picture upward or
downward. It is recommended to adjust the picture upward.
8. Use the horizontal lens shift dial to shift the picture left or right.
Turning off the power
1. Press the STANDBY/ON button on the projector or the remote
control.
The message " Power off? " will appear on the screen for about
5 seconds.
2. Press the STANDBY/ON button on the projector or the remote
control again while the message appears.
The projector lamp will go off, and the POWER indicator will
begin blinking in orange.
Then the POWER indicator will stop blinking and light in
steady orange when the lamp cooling is complete.
3. Make sure that the POWER indicator lights in steady orange,
and set the power switch to the OFF position (marked " O ").
The POWER indicator will go off. Attach the lens cover.
Do not turn the projector on for 10 minutes or more after turning it off. Turning the projector on
again too soon could shorten the lifetime of some consumable parts of the projector.
WARNING
►Do not touch around the lamp cover and the exhaust vents during use or just after use,
since it is too hot.
8
ASPECT
button
STANDBY/ON
BLANK
ASPECT
PUSH
ENTER
PAGE UP
ESC
POSITION
MAGNIFY
MY BUTTON
ON
OFF
FREEZE
KEYSTONE
MUTE button
Zoom ring
Top
2/5
DOWN
1/10
1/10
STANDBY/ON button
LASER
INDICATOR
STANDBY/ON
VIDEO
BLANK
ASPECT
PUSH
ENTER
PAGE UP
ESC
MENU
POSITION
AUTO
MAGNIFY
MY BUTTON
1
ON
OFF
2
FREEZE
KEYSTONE
Power
switch
INPUT button
LASER
INDICATOR
VIDEO
RGB
MY SOURCE/
DOC.CAMERA
SEARCH
LASER
PAGE DOWN
MENU
RESET
AUTO
VOLUME
1
+
2
-
MUTE
VOLUME +/- buttons
Focus ring
UP
LEFT
RIGHT
Lens shift cover
POWER indicator
RGB
MY SOURCE/
DOC.CAMERA
SEARCH
LASER
PAGE DOWN
RESET
VOLUME
+
-
MUTE
Advertisement
Table of Contents
