Connecting Power Supply; Turning On The Power - Dukane 8953H User Manual

Connecting power supply

1. Connect the connector of the power cord to the AC IN
(AC inlet) of the projector.
2. Firmly plug the power cor
WARNING
►Please use extra caution when connecting the power cord, as incorrect or faulty
connections may result in fire and/or electrical shock.
• Only use the power cord that came with the projector. If it is damaged, consult your
dealer to get a new one.
• Only plug the power cord into an outlet whose voltage is matched to the power cord.
The power outlet should be close to the projector and easily accessible. Remove the
power cord for complete separation.
• Never modify the power cord.

Turning on the power

1. Make sure that the power cord is firmly and correctly connected
to the projector and the outlet.
2. Remove the lens cover, and set the power switch to the ON
position (marked " I ").
The POWER indicator will light up in steady orange. Then
wait several seconds because the buttons may not function for
these several seconds.
3. Press the STANDBY/ON button on the projector or the remote
control.
The projection lamp will light up and the POWER indicator will
begin blinking in green. When the power is completely on, the
indicator will stop blinking and light in steady green.
WARNING
►A strong light is emitted when the projector's power is on. Do not look into the lens
of the projector or look inside of the projector through any of the projector's openings.
NOTE
• When the AUTO ON in the OPTION menu is set to the TURN ON , and the power was turned
off by the power switch last time, turning the power switch on makes the projection lamp light
on without pushing the STANDBY/ON button. For more information, please see the " Operating
Guide " in the CD.
d
's plug into the outlet.
Connector of the
AC IN
power cord
to the outlet
STANDBY/ON button
POWER indicator
LASER
INDICATOR
STANDBY/ON VIDEO RGB
MY SOURCE/
DOC.CAMERA
SEARCH
BLANK LASER
ASPECT
PUSH ENTER
PAGE UP PAGE DOWN
ESC MENU RESET
POSITION AUTO
MY BUTTON VOLUME
MAGNIFY
ON 1 +
OFF 2 -
FREEZE KEYSTONE MUTE
Power
switch
5