Using A Usb Storage; Using An Sd Card - Dukane 8953H User Manual

Using a USB storage

In order to view images stored in a USB storage, such as
a USB memory, insert the device into the AUX I/O port.
Before removing the USB storage, be sure to perform
the REMOVE MEDIA procedure using the PC-LESS
PRESENTATION menu under the MIU menu.

Using an SD card

In order to view images stored in an SD storage, such as an SD memory card, insert the device into
the SD card slot. Or, in order to use the wireless network function, load the internal clock battery
(12) and insert the designated wireless network card that is sold as an option (15) into the slot.
Inserting the SD card
1. Make sure that the power code is not plugged into the projector for the wireless
network card only.
2. Remove the SD card slot cover. After slowly insert the SD card completely into
the SD card slot, replace the SD card slot cover.
Using the slot cover lock for security
Using the enclosed slot cover lock can prevent the SD card slot cover from being
opened.
1. Open the two plates of the slot cover lock to put the tips of two plates together,
and then insert the tips to the lock hole of the SD card slot cover.
2. Put the body of the two plates together. Then, hook a padlock or combination
lock to the hole of the slot cover lock.
Removing the SD card
1. Perform the REMOVE MEDIA procedure using the PC-LESS PRESENTATION menu under
the MIU menu for SD storage card only.
2. Turn the projector off and unplug the power code from the projector for the wireless network
card only.
3. Remove the SD card slot cover. After taking the SD card away, replace the SD card slot cover.
CAUTION
►Do not touch the SD card while being accessed.
►To use the wireless network function, the designated wireless network card that is
sold as an option is required.
• The wireless network card is not permitted to be sold or used in some countries
and regions. Use the card only in the country or region where you buy it. For more
information, ask your local dealer.
• When using the wireless network card, to comply with FCC RF exposure compliance
requirements, the antenna used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be co-located or
operating in conjunction with any other antenna or transmitter.
• Before using the projector with a wired LAN, remove the wireless network card.
4
SD card slot cover
(SD card slot inside)
AUX I/O port
Angled corner