Basic Operations On The Setting Menus; Initializing The Setting Menu - Panasonic AG-HPG10P Operating Instructions Manual

Basic operations on the setting menus

1
Hold down [POWER] for at least 2 seconds
to turn the power on.
2
Press [MODE] to switch to the thumbnail
display off screen.
HD720P
60
C 1
H
C 2
H
3
Press [MENU] to display the menu.
Example:
MAIN MENU
1 . RECORDING SETUP
SW MODE
2 .
3 . PLAYBACK FUNCTIONS
4 . AV OUT SETUP
5 . DISPLAY SETUP
6 . CARD FUNCTIONS
7 . OTHER FUNCTIONS
PUSH MENU TO EXIT
4
Using [STOP] and [PLAY], move the
highlighting to the function to be set.
5
Press [STILL] to display the setting item.
Example:
RECORDING SETUP
SYS FORMAT
SD(480i/576) MODE
1394 TC REGEN
TC MODE
TCG
TC PRESET
1394 UB REGEN
UB MODE
PUSH MENU TO RETURN
70
1 2
106 mn
1080i/60i
720P/60P
720P/30PN
720P/24PN
480i/60i
REC RUN
ON
FRM.RATE
6
Using [STOP] and [PLAY] , move to the item
to be set.
RECORDING SETUP
SYS FORMAT 720P/60P
SD(480i/576) MODE DV
1394 TC REGEN ON
TC MODE DF
TCG REC RUN
TC PRESET
1394 UB REGEN ON
FRM.RATE
UB MODE
PUSH MENU TO RETURN
7
Press [STILL] to set the item.
To change a numerical value, etc., use [FF] and
[REW] to change the setting.
8
To change other items, repeat steps 6 and 7.
To exit the settings, press [MENU] and return to
the thumbnail display off screen.
9
To change another function, repeat steps 4
to 7.
To exit the settings, press [MENU] and return to
the thumbnail display off screen.

Initializing the setting menu

You can return (initialize) the setting menu user
files to the factory status.
1
Switch the display to the thumbnail display
off screen.
2
Press [MENU].
3
Using [STOP], [PLAY] and [STILL], select
"OTHER FUNCTIONS" – "USER FILE"
– "INITIAL".
4
Press [STILL].
The menu settings of the user files currently
being used are returned to the factory status.