Panasonic AG-HPG10P Operating Instructions Manual page 37

4) Clip information
The following information is displayed.
Clip name
CLIP NAME:
Time code when recording was
START TC:
started
User's bit when recording was
START UB:
started
Date on which the clip was
DATE:
recorded
Time at which the clip was
TIME:
recorded
Length of the clip
DURATION:
Recording format of the clip
V_FORMAT:
Playback frame rate
FRAME RATE:
Recording frame rate (displayed
REC RATE:
on clips specially recorded by the
camera recorder)
5) Clip meta-data
Items for referencing the detailed information
on the clips (clip meta-data) are displayed.
6
If necessary, reference the clip meta-data
contents.
When the clip meta-data item is selected using
[STOP] and [PLAY], and then [STILL] is pressed,
the following information is displayed.
Global clip ID
GLOBAL CLIP
(a unique number which is not
ID:
assigned to any other clips in the
world)
Clip name which can be assigned
USER CLIP
by the user
NAME:
Normally, the GLOBAL CLIP ID is
provided as the clip name.
Video signal system, etc. (frame,
VIDEO:
pull-down, aspect ratio)
Audio channel system, etc.
AUDIO:
(sampling rate, bit rate)
Last update date, etc.
ACCESS:
(name of the person who created
the clip and date on which it was
created, date on which the clip
was last updated and name of the
person who last updated the clip)
Serial number of device used to
DEVICE:
record the clip (name of the device
manufacturer, serial number,
model number)
Recording start and end dates,
SHOOT:
etc.
(name of person who shot the clip,
date on which shooting started,
date on which shooting ended,
shooting location information,
altitude, longitude, latitude,
shooting location information
source, shooting location)
Program name, scene number,
SCENARIO:
etc.
(program name, scene number,
take number)
Reporter, news-gathering object,
NEWS:
etc.
(reporter, purpose of news
gathering, object of news
gathering)
TEXT MEMO number, position,
MEMO:
name, text content (no., recording
position, person who input the
memo, text information)
• An OFFSET is indicated by
the number of frames from the
beginning. On a thumbnail text
memo display, this OFFSET is
indicated as a time code instead.
• Texts consisting of up to 1,000
characters can be attached, but
only the first 100 characters will
actually be displayed.
• The left and right cursors are
used to move from one text
number to another.
Information on the thumbnail
THUMBNAIL:
images
7
Press [MENU], and select EXIT to exit.
37