Viewfinders - Panasonic AG-DVX100A Operating Manual

Viewfinders

This camera recorder has two viewfinders: a
viewfinder that uses a small LCD, and a 3.5-
inch LCD monitor.
Use the one that better suits the application and
the shooting conditions concerned.
OThe brightness and colour tones may differ
between the images in the viewfinder and on
the LCD monitor and the images on a TV
monitor.
Use the TV monitor when performing the final
check of the images.
Using the viewfinder
1
Set the POWER switch on the camera
recorder to ON, and check that an image
appears in the viewfinder.
OKeep the LCD monitor closed.
2
Position the viewfinder where its screen
images can be seen most comfortably.
viewfinder
OThe
perpendicularly up to angle of about 90
degrees.
3
Adjust the diopter adjustment dial in such a
way that the characters on the viewfinder
screen come into sharp focus.
Diopter adjustment
dial
Do not point the viewfinder's eye-piece at
the sun.
This may damage the internal parts.
24 (E)
can be raised
Eye-piece
4
Select YES as the setting for the EVF SET
item on the setting menu DISPLAY SETUP
screen.
OFor details on the menu operations, refer
to page 38.
5
Select the EVF COLOUR LEVEL item, tilt
the OPERATION lever in the 3 or 4
direction, and adjust the colour level of the
screen. (If the remote control unit is used,
press the "M" button among the SET
buttons.)
E V F S E T
E V F C O L O U R L E V E L
[ – ] ? ? ? ? ? ? ? ? – – – – [ + ]
E V F B R I G H T N E S S
[ – ] ? ? ? ? ? ? ? ? – – – – [ + ]
E V F C O N T R A S T
[ – ] ? ? ? ? ? ? ? ? – – – – [ + ]
P U S H M E N U T O R E T U R N
6
Select the EVF BRIGHTNESS item, and tilt
the OPERATION lever in the 3 or 4
direction to adjust the screen's brightness.
(If the remote control unit is used, press the
"M" button among the SET buttons.)
E V F S E T
E V F C O L O U R L E V E L
[ – ] ? ? ? ? ? ? ? ? – – – – [ + ]
E V F B R I G H T N E S S
[ – ] ? ? ? ? ? ? ? ? – – – – [ + ]
E V F C O N T R A S T
[ – ] ? ? ? ? ? ? ? ? – – – – [ + ]
P U S H M E N U T O R E T U R N
7
Select the EVF CONTRAST item, tilt the
OPERATION lever in the 3 or 4 direction,
and adjust the contrast of the screen. (If the
remote control unit is used, press the "M"
button among the SET buttons.)
E V F S E T
E V F C O L O U R L E V E L
[ – ] ? ? ? ? ? ? ? ? – – – – [ + ]
E V F B R I G H T N E S S
[ – ] ? ? ? ? ? ? ? ? – – – – [ + ]
E V F C O N T R A S T
[ – ] ? ? ? ? ? ? ? ? – – – – [ + ]
P U S H M E N U T O R E T U R N