Recording Setup Screen - Panasonic AG-DVX100A Operating Manual

Setting menus
PLAYBACK FUNCTIONS screen
Item/
Description of settings
(display mode)
AUDIO OUT For setting the audio signals to be output
(VCR) from the AUDIO IN/OUT connectors (pin
jacks) when a tape is played back.
CH1•CH2:
CH1 connector = CH1 signals
CH2 connector = CH2 signals
CH1:
CH1 connector = CH1 signals
CH2 connector = CH1 signals
CH2:
CH1 connector = CH2 signals
CH2 connector = CH2 signals
Inputs and audio tracks recorded
Input When shooting
Internal
CH1
microphone L
Internal
CH2
microphone R
INPUT 1 (XLR) CH1
INPUT 2 (XLR) CH2 (CH1)
AUDIO IN/OUT
__
CH1 (pin jack)
AUDIO IN/OUT
__
CH2 (pin jack)
The audio tracks on which signals are to be recorded during
shooting can be changed using the CH1 SELECT switch and
CH2 SELECT switch.
The audio tracks on which signals are to be recorded during
audio dubbing can be changed using the A DUB INPUT item
on the AV IN/OUT SETUP screen.
32K (12-bit) AUDIO item and AUDIO OUT item settings, and audio tracks
whose signals are output from the AUDIO IN/OUT connectors (pin jacks)
32K (12-bit) AUDIO
Audio recording
item setting
mode
ST1
32K (12 bit)
ST2
MIX
__
48K (16 bit)
The underlining indicates the factory setting.
44 (E)

RECORDING SETUP screen

(display mode)
REC SPEED
(Camera)
(VCR)
AUDIO REC
(Camera)
(VCR)
MIC ALC
(Camera)
When audio dubbing
(12-bit mode)
MIC GAIN 1
(Camera)
CH3
CH4
MIC GAIN 2
(Camera)
CH3
CH4 (CH3)
CH3
CH4
AUDIO OUT AUDIO IN/OUT
item setting CH1 output
CH1•CH2 CH1
CH1 CH1
CH2 CH2
CH1•CH2 CH3
CH1 CH3
CH2 CH4
__
CH1+CH3
CH1•CH2 CH1
CH1 CH1
CH2 CH2
Item/
Description of settings
For selecting the recording time mode.
SP : SP (standard play) mode
LP : LP (long play) mode
For selecting the system for converting the
recording to PCM audio.
32K (12 bit) :
48K (16 bit) :
For setting the mic level automatic control
function to ON or OFF.
OFF ON
Audio distortion caused by excessively high
input level can be minimized by selecting
ON for this item.
O The recording level of the audio signals
must be adjusted using the AUDIO
controls, irrespective of this setting.
For setting the input level of the external
microphone which is connected to the
INPUT 1 connector.
-50 dB -60 dB
For setting the input level of the external
microphone which is connected to the
INPUT 2 connector.
-50 dB -60 dB
AUDIO IN/OUT
CH2 output
CH2
CH1
CH2
CH4
CH3
CH4
CH2+CH4
CH2
CH1
CH2
12-bit/32kHz
16-bit/48kHz