Sw Mode Screen - Panasonic AG-DVX100A Operating Manual

Setting menus

SW MODE screen

Item/
Description of settings
(display mode)
MID GAIN For setting the gain value which is to be
(Camera) allocated to the M position of the GAIN
switch.
0 dB, 3 dB, 6 dB, 9 dB, 12 dB
HIGH GAIN For setting the gain value which is to be
(Camera) allocated to the H position of the GAIN
switch.
0 dB, 3 dB, 6 dB, 9 dB, 12 dB
ATW For setting the ATW (Auto Tracking White)
(Camera) function which is to be allocated to the
WHITE BAL switch.
OFF:
The ATW function is not activated.
However, if it has been set in the AUTO
button or USER button, it will follow the
operation of the button concerned.
Ach:
The ATW function is activated when the
WHITE BAL switch has been set to the A
position.
Bch:
The ATW function is activated when the
WHITE BAL switch has been set to the B
position.
PRE:
The ATW function is activated when the
WHITE BAL switch has been set to the
PRST position.
HANDLE ZOOM For setting the zoom speeds which are to
(Camera) be allocated to the positions of the
HANDLE ZOOM switch.
L/OFF/H:
LOW/OFF/HIGH are set to the 1/2/3
positions. (At OFF, no zoom operations
are performed.)
L/M/H:
LOW/MID/HIGH are set to the 1/2/3
positions.
IRIS DIAL For setting the rotational direction of the
(Camera) IRIS dial and iris control (in the MANUAL
IRIS mode).
DOWN OPEN:
The iris opens when the IRIS dial is
turned downward.
UP OPEN:
The iris opens when the IRIS dial is
turned upward.
The underlining indicates the factory setting.
42 (E)
Item/
Description of settings
(display mode)
USER1 For setting the operation of the function
allocated to the USER1 button.
(Camera)
COLOUR BAR:
The colour bar display is set to ON or OFF.
SPOTLIGHT:
The auto iris control for the spotlight is
set to ON or OFF.
BACKLIGHT:
The auto iris control for backlight
compensation is set to ON or OFF.
BLACKFADE:
When the button is held down, the whole
image is faded out into black. The sound
is also faded out at the same time.
WHITEFADE:
When the button is held down, the whole
image is faded out into white. The sound
is also faded out at the same time.
MODECHECK:
When the button is pressed, the camera
status currently set is displayed in the
viewfinder and on the LCD monitor
where it can be checked.
ATW:
The operation of the ATW function is set
to ON or OFF.
ATWLOCK:
When the button is pressed, the white
balance value is fixed; when it is pressed
again, the operation of the ATW function
is performed.
GAIN:18 dB:
When this button is pressed, the gain is
set to 18 dB.
O The picture may be temporarily
disturbed when the gain has been
switched to 18 dB or from 18 dB to
another value.
INDEX:
When the button is pressed during
shooting or recording, an index signal is
recorded on the tape. If it is pressed while
shooting or recording is temporarily
stopped, the index signal recording
standby mode is established.
shooting or recording is commenced from
this mode, the index signal will be recorded
on the tape.
enables index searches to be performed
during playback. (See page 62)
SLOWSHUT:
When the button is pressed, the slow
shutter mode is established. Each time
it is pressed, the mode is turned ON or
OFF alternatively.
USER2 For setting the operation of the function to
(Camera) be allocated to the USER2 button.
The settings are the same as for the ones
for the USER1 items.
BACKLIGHT
USER3 For setting the operation of the function to
(Camera) be allocated to the USER3 button.
The settings are the same as for the ones
for the USER1 items.
INDEX
When
Recording index signals