Inserting The Batteries Into The Wireless Display - Panasonic EW3153 Instructions Manual

Inserting the Batteries into the Wireless Display
*Always use alkaline batteries. (2 AA-size LR6 alkaline batteries)
• When replacing batteries, always use  fresh alkaline batteries of the
same type from the same manufacturer, and replace them
simultaneously.
Replace batteries when:
•
If both batteries for the main unit and the wireless display must be
replaced at the same time,
are alternately displayed.
13
English
1. Turn the wireless display over and remove
the battery cover by sliding it in the
direction of the arrow while pressing
lightly on the
2. Check the polarities of the batteries and
install them correctly.
3. Replace the battery cover and slide it
closed.
The mark shown at left appears during use.
In this case, press the On/Off and the Start button on the
main unit to interrupt the measurement.
mark.
(main unit) and (wireless display)