Troubleshooting ... 16 Specifications... 18 Introduction Thank you for purchasing the Panasonic Upper Arm Blood Pressure Monitor EW3111. Designed for easy, one-touch operation, this monitor incorporates Precise Logic™ technology to provide reliable measurements. Measuring your own blood pressure is an important way of monitoring your health.
Important Instructions Before Use 1. Do not confuse self-monitoring with self-diagnosis. Blood pressure measurements should only be interpreted by a health professional who is familiar with your medical history. 2. If you are taking medication, consult with your physician to determine the most appropriate time to measure your blood pressure.
Logic™ measurement system that verifies both the height and width of the pulse wave in order to reliably measure blood pressure. By using the Precise Logic™ measurement system, measurement reliability and accuracy have been improved. Panasonic Technology Double Check Measurement System Checks both Pulse Height and Pulse Width...
Diagram of device Tube Display Memory / Recall/(Delete All) Button 1 ON/OFF / Start Button Connecting tube Attachment of cuff holder to cuff Slide from below in the direction of the arrow, at the rear of the unit, until a clicking sound is heard.
• Low temperature conditions can cause battery life to be shortened. CAUTION: Do not throw batteries into a fire. Doing so may result in an accident or explosion. Fitting the Blood Pressure Monitor 1. Attaching the cuff to the upper arm. • Make sure the cuff is wrapped so that it is in contact with the skin.
Instructions for correct measurement of blood pressure Measurement in a sitting position 1. Rest your elbows on a table or other level surface. 2. Make adjustments so that the height of the cuff and heart are at the same level. 3.
Storing blood pressure readings This monitor has enough memory capacity to store 21 readings for two users. M1 and M2 will flash on the display after a measurement. 1. Press the Memory/Recall Button number if you want your readings to be recorded. Example: Person A is recorded under M1 M / R...
Storage 1. Loosely roll up the cuff and place it in the cuff holder. 2. Put the tube inside the cuff. • Do not wrap the tube around the unit, etc. Excessive straining of the tube can cause malfunctioning. Troubleshooting Display Status before error Pressurization to above...
485 g (17.1 oz.) not including batteries Specifications are subject to change without notice. Model EW3111 is intended to be used for the oscillometric PRECISE LOGIC™ measurement of systolic and diastolic blood pressure and pulse rate using a pressurized cuff.