Table of Contents
Advertisement
Preparation
※The product can be powered by batteries.
1.
Turn the main unit over, gently
press the
cover and take out the battery
cover in the direction indicated
by the arrow.
2.
Check the
and install them correctly.
3.
Close the battery cover
until you hear a click.
Be sure to
observe
About batteries:
If the low battery mark (
and replace all batteries.
Batteries last for approx. 300 times, which is 3 times/day for 3 months (when
using a pack of new Panasonic zinc carbon batteries). (Under the condition
that the room temperature is 23 °C, 22.7 kpa (170 mmHg) pressured, and the
circumference of upper arm is 30cm.)
If the ambient temperature is low, the battery life will be shortened.
The service life of other brands of batteries may be very short, so it is recommended
to use Panasonic zinc carbon or alkaline batteries.
10
part of the battery
polarities of the batteries,
Always follow the cautions printed on the batteries.
Check the
correctly.
Take out the batteries with insufficient power immediately.
When this device is not used for a long time, take out the
batteries from the device.
When replacing batteries, new batteries of the same type must
be used and all 4 batteries shall be replaced at the same time.
Please use the batteries within the expiration date.
Failure to comply with the above matters may result in injury
or damage due to battery heating, cracking or liquid leakage.
) appears on the display, please turn off the device
Caution
polarities of the batteries and install them
Inserting batteries
part
Advertisement
Table of Contents
