Table of Contents
Advertisement
WARNING: To reduce the risk of personal injury from hot
surfaces, observe the thermal labels on each power supply or
module.
WARNING: To reduce the risk of injury from electric
shock hazards, do not open power supplies. Refer all maintenance,
upgrades, and servicing to qualified personnel.
CAUTION: Electrostatic discharge (ESD) can damage
electronic components. Be sure that you are properly grounded
(earthed) before beginning any installation procedure.
To remove the component:
1. Remove the access panel ("Access Panel" on page 17).
2. Remove the power cord from the unit to be removed.
3. Remove the four screws from the chassis, and remove the power supply from
the server.
CAUTION: To prevent improper cooling and thermal damage,
do not operate the server unless all bays are populated with either a
component or a blank.
Removal and Replacement Procedures
23
Advertisement
Table of Contents
