Basic Operation; Power On And Start The System - JRC JMA-5212-4 Simplified Manual

2

BASIC OPERATION

2.1

Power ON and Start the System

Procedures
1 Check that the ship's mains are turned on.
2 Press the [STBY] key.
The system is turned on, and the preheating time is displayed.
Preheat is indicated upper left of the display.
3 Wait until the preheating time is over.
When the preheating time is over, the preheating time screen disappears, and Preheat upper left of
the display changes to Standby .
4 Press the [TX / PRF] key.
The radar will start transmission and the antenna will start rotating.
Standby upper left of the display changes to Transmit .
S-2
Simplified Manual