Add Barcode Stack/Command Stack Settings - Pioneer DVD-V5000 Operating Instructions Manual

10 Barcode Stack / Command Stack
3 Press ENTER or the
button 4 times to select "AUDIO."
Press the number button 1 followed by
ENTER.
Command Stack
Group(1-001)
Group001
Move Select
4 Use the
left/right) buttons to select "OK" then
press ENTER.
Command Stack
Group(1-001)
Group001
Move Select
5 Save the change.
Changes are only saved when "OK" is
highlighted and ENTER is pressed.
If "CANCEL" is highlighted when the ENTER
is pressed, all corrections are lost.
Downloaded From DvDPlayer-Manual.com Pioneer Manuals
58
(cursor down)
Command(1-003)
001 PLAY
TITLE 05
002 03:123000-129000
SEARCH CHAPTER 03
003 05:03-07 03 2 1
MARK CHAPTER 05
004
SUBTITLE 03
005
AUDIO 1
006 ANGLE 1
007 OK CANCEL
008
ENTER Return RETURN Exit
/ / /
(cursor up/down/
Command(1-003)
001 PLAY
TITLE 05
002 03:123000-129000
SEARCH CHAPTER 03
003 05:03-07 03 2 1
MARK CHAPTER 05
004
SUBTITLE 03
005
AUDIO 1
006
ANGLE 1
007 OK CANCEL
008
ENTER Return RETURN Exit
Add Barcode Stack/Command
Stack Settings
1 Use the
to select where the new command will
be inserted.
2 Press ENTER.
3 Build a Barcode Stack/Command Stack
according to the previous instructions
(Pages 50 – 56).
4 Save the addition.
HOME MENU
Changes are only saved when "OK" is
highlighted and ENTER is pressed.
If "CANCEL" is highlighted when the ENTER
is pressed, all corrections are lost.
HOME MENU
/
(cursor up/down) buttons