Key Lock; To Temporarily Suspend Key Lock - Pioneer DVD-V5000 Operating Instructions Manual

09 Advanced Setup Menu

Key Lock

The Key Lock sets whether remote control or
front panel buttons are enabled or disabled.
1 Press and hold HOME MENU for one
second.
The screen displays the ADV. SETUP menu.
2 Use the
select KEY LOCK.
3 Use the
toggle the setting ON then press ENTER.
Select OFF to disable the Key Lock function.
4 Use the
to select an item, then the
left/right) buttons to set the item.
• 1. TRAY LOCK (Off/On)
With the Tray Lock ON, the disc tray cannot
be opened by using the remote control's
OPEN/CLOSE
button, or the RS-232C Tray Open
command.
Downloaded From DvDPlayer-Manual.com Pioneer Manuals
44
(cursor down) button to
/
(cursor left/right) buttons to
/
(cursor up/down) buttons
/
button, the front panel's
• 2. IR (Enable/Disable)
With the IR Disable, the unit ignores
commands sent from the remote control or
through barcodes.
• 3. FRONT (Enable/Disable)
With the Front Disable, the unit ignores
commands issued from the front panel.
5 Press RETURN to cause the display to
return from the KEY LOCK setting screen
to the ADV. SETUP menu.
To Temporarily Suspend KEY
LOCK
The Key Lock setting is preserved even when the
player's power is turned OFF. However, the Key
Lock function can be temporarily suspended if
necessary to change discs or modify other
settings.
To temporarily suspend the Key Lock, hold
down the RETURN, the
the
approximately 2 seconds.
• This release operation can be performed
during playback if necessary.
• All KEY LOCK, TRAY LOCK functions are
released and ordinary operations can be
performed. This condition does not change
any settings preserved in the player. If the
power is turned off then back on, the unit
reverts to the previous locked condition.
• With the KEY LOCK function temporarily
suspended, hold down the RETURN, the
(cursor down), and the
simultaneously for approximately 2 seconds.
The suspended condition ends and the unit
returns to a locked status.
(cursor
While the KEY LOCK function is temporarily
suspended, even if the ADV. SETUP menu is
opened and the KEY LOCK setting is
changed, the temporarily suspended state
continues when the ADV. SETUP menus is
closed. The newly selected KEY LOCK
setting only takes effect when the temporary
suspension is ended.
(cursor down), and
buttons simultaneously for
buttons