Dolby Digital Out; Dts Out; 96Khz Pcm Out; Mpeg Out - Pioneer DVD-V5000 Operating Instructions Manual

05 Initial Settings menu

Dolby Digital Out

You only need to make this setting if you
connected this system to an AV receiver (or
other component) using the digital output.
• Default setting is Dolby Digital.
Initial Settings
Digital Audio Out
Video Output
Language
Display
Option
If your AV receiver (or other connected compo-
nent) is Dolby Digital compatible, set to Dolby
Digital, otherwise set to Dolby Digital > PCM.

DTS Out

You only need to make this setting if you
connected this player to an AV receiver (or other
component) using the digital output.
• Default setting is Off.
Initial Settings
Digital Audio Out
Video Output
Language
Display
Option
If your AV receiver (or other connected compo-
nent) has a built-in DTS decoder, set this to DTS,
otherwise set to Off. Check the manual that
came with the other component if you're unsure
whether it is DTS compatible.
• If you set to DTS with a non-DTS compatible
amplifier, noise will be output when you play
a DTS disc.
• DTS sound is no output from the AUDIO
OUT (analog audio output) jacks.
Downloaded From DvDPlayer-Manual.com Pioneer Manuals
20
Digital Out Dolby Digital
Dolby Digital Out Dolby Digital > PCM
DTS Out
96 kHz PCM Out

MPEG Out

Digital Out Off
Dolby Digital Out DTS
DTS Out
96 kHz PCM Out
MPEG Out

96kHz PCM Out

You only need to make this setting if you
connected this player to an AV receiver (or other
component) using the digital output.
• Default setting is 96kHz > 48kHz.
Initial Settings
Digital Audio Out Digital Out
Video Output Dolby Digital Out
Language DTS Out
Display 96 kHz PCM Out
Option MPEG Out
If your AV receiver (or other connected compo-
nent) is compatible with high sampling rates (96
kHz), set this to 96kHz, otherwise set it to 96kHz
> 48kHz (96 kHz audio is converted to a more
compatible 48 kHz). Check the manual that
came with the other component if you're unsure
whether it is 96 kHz compatible.
MPEG Out
You only need to make this setting if you
connected this player to an AV receiver (or other
component) using the digital output.
• Default setting is MPEG > PCM.
Initial Settings
Digital Audio Out Digital Out
Video Output Dolby Digital Out
Language DTS Out
Display 96 kHz PCM Out
Option MPEG Out
If your AV receiver (or other connected compo-
nent) is compatible with MPEG audio, set this to
MPEG, otherwise set it to MPEG > PCM (MPEG
audio is converted to more compatible PCM
audio). Check the manual that came with the
other component if you're unsure whether it is
MPEG audio compatible.
96 kHz > 48 kHz
96 kHz
MPEG
MPEG > PCM