Direct Transmission - Panasonic UF-780/790 Operating Instructions Manual

Sending Documents

Direct Transmission

If your machine's memory is full or you wish to send the document immediately, use Direct Transmission.
Manual Number Dialing (Direct Transmission)
To dial the telephone number manually, follow the steps below.
1
2
3
4
5
NOTE
52
Set document(s) face down.
8
1
Enter a telephone number from the keypad.
Ex:
5 5 5 1 2 3 4
Your machine starts to dial the telephone number.
1. If you need a special access number to get an outside line, dial it first then press
enter a pause (represented by a "-") before dialing the full number.
Ex: 9 PAUSE 5551234
2. If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing,
press
TONE
The dialing mode will be changed from Pulse to Tone after dialing the digit "/".
Ex: 9 PAUSE TONE 5551234
3. To stop the transmission, press
The display shows:
COMMUNICATION STOP ?
1:YES 2:NO
Press to stop the transmission. The Communication Journal will not print out regardless of
1
the printout mode setting of the Communication Journal.
9
(represented by a "/").
.
STOP
ENTER STATION(S)
THEN PRESS START 00%
MEMORY XMT=ON
1:OFF 2:ON
ENTER STATION
00%
PRESS START TO DIAL
5551234
* DIALING *
5551234
PAUSE
to