Start-Up Data - York ARC 045 Installation Manual

Inspection of the gas heating section (models ARG/ARD)

2.2 Start-up Data

Electrical data
Power supply
Control voltage
Fan consumption (A)
Consumption of condenser fan 1 (A)
Consumption of condenser fan 2 (A)
Consumption of compressor 1 (A)
Consumption of compressor 2 (A)
Consumption of supply fan (A)
Electric resistor 1 (Optional)
Electric resistor 2 (Optional)
Cool and heat modes
Subcooling (min. 8 K, max. 18 K)
Superheat (min. 4 K, max. 10 K)
Subcooling (min. 8 K, max. 18 K)
Superheat (min. 4 K, max. 10 K)
Air flow values
Exhaust hoods installed
Inspection of compressors
Verification that direction of rotation is correct
Refrigerant circuit. Compressor 1
Mode
Complete liquid line checked in sight glass
Correct oil level checked in sight glass
Refrigerant circuit. Compressor 2
Mode
Complete liquid line checked in sight glass
Correct oil level checked in sight glass
Design
Measured
Unit installation data
Start-up Data
Rating plate
Check specifica‐
tions in the Installa‐
tion Manual
Value
Liquid pressure: _____ bar
ºC
Liquid temperature: _____ ºC
Suction pressure: _____ bar
ºC
Suction temperature: _____ ºC
Value
Liquid pressure: _____ bar
ºC
Liquid temperature: _____ ºC
Suction pressure: _____ bar
ºC
Suction temperature: _____ ºC
2
2.2
Actual
3
m /h
45