TP-Link ARCHER D7 User Manual page 84

Chapter 12
8 ) Enter the Pre-Shared Key
keep Perfect Forward Secrecy
Note:
Make sure Site A and Site B use the same key.
9 ) Leave the Advanced
OK to save.
3 Configuration on Site B (remote network). Refer to step 2
configuration on Site A and make sure that Site A and Site B
use the same pre-shared keys
settings.
4 The Status column will change to
has been set up successfully.
5 Check the VPN connection. You can ping site B' LAN IP
from your computer in site A to verify that the IPSec VPN
connection is set up correctly.
Tips: To check the VPN connection, you can do the following.
1. On the host in Site A, press [Windows Logo] + [R] to open Run dialog. Input
"cmd" and hit OK.
2. In the CLI window, type in "ping 192.168.2.x" ("192.168.2.x" can be IP address of
any host in Site B). Then press [Enter].
Specify Your Network Settings
for IKE authentication. Then
enabled.
Settings as default value. Then click
and Perfect Forward Secrecy
UP if the VPN connection
80