Access Control - TP-Link ARCHER D7 User Manual

Chapter 6
Done!
6 2

Access Control

Access Control is used to block or allow specific client devices to access your network
(via wired or wireless) based on a list of blocked devices (Blacklist) or a list of allowed
devices (Whitelist).
I want to:
To block specific device(s)
1 ) Select Block wireless access from the devices in the list
below and click Save.
2 ) Select the device(s) to be blocked in the
table.
3 ) Click Block above the
devices will be added to
To allow specific device(s)
1 ) Select Allow wireless access only from the devices in the
list below and click Save.
2 ) Click Add.
3 ) Enter the MAC Address
Address from Devices Online
to your wireless network) and enter the
the device.
4 ) Select the checkbox to enable this entry, and click OK.
Now MAC Filtering is implemented to protect your wireless
network.
Block or allow specific client devices to access my network (via
wired or wireless).
Network Security
Devices Online
Devices Online table. The selected
Devices List automatically.
(You can copy and paste the
list if the device is connected
Description
MAC
of
25