Test Internet Connectivity - TP-Link ARCHER D7 User Manual

Chapter 4
Select the checkbox to enable IPv6 feature.
Addressing Type:
SLAAC is the most commonly used addressing type.
IPv6 Gateway:
Note: If your ISP has provided the IPv6 address, click
IPv6 specified by ISP and enter the parameters provided by your ISP.
4 ) Click OK to make the settings effective.
2 Configure the IPv6 LAN settings. Go to
Select IPv6 to configure IPv6 LAN parameters.
1 ) Select the Prefix Delegated WAN
up, from the drop-down list.
2 ) Leave the rest of the settings as default.
3 ) Click Save to make the settings effective.
3
Done. IPv6 service is available for your network.
4 4

Test Internet Connectivity

After setting up the Internet connection, you need to know the Internet connectivity.
The modem router provides a diagnostic tool to help you locate the malfunction.
Consult your ISP for the addressing type, DHCPv6 or SLAAC.
Keep the default setting as Current Connection.
Connection, the IPv6 connection you just set
Set Up Internet Connections
Advanced to reveal more settings. Check to use
Advanced > Network > LAN Settings page.
17