Table of Contents
Advertisement
Features Summary
Advanced
features!
How to set the advanced features
1. Press p.
2. Press ( or ) until the following is
displayed:
then press w and press ( or )
until the desired feature is displayed.
Programming table
For the settings column, the bold type indicates the default setting.
Code
Feature & Display
Setting the journal report to print
automatically
#22
AUTO JOURNAL
=ON
Sending document overseas
OVERSEAS MODE
=ERROR
If you have difficulty sending an
overseas fax, activate this feature
#23
before starting transmission. This
feature makes sending documents
easier as the transmission speed is
slowed down.
Sending a fax at a specific time
DELAYED SEND
=OFF
This feature allows you to take
advantage of low-cost calling
hours offered by your telephone
company.
#25
The setting can be reserved to
take place up to 24 hours in
advance.
64
ADVANCED MODE
PRESS SET
[±]
[±]
[±]
3. Press + or - until the desired setting is
displayed.
4. Press w.
5. Press p.
Note:
Step 3 may be slightly different depending on the
feature.
See page 61 for more details.
Settings
How the unit operates
"ON": The unit will print the journal
ON
report automatically after every 30
new fax communications (p. 35).
OFF
"NEXT FAX": This setting is
effective only for the next
NEXT FAX
attempted fax transmission. After
transmission, the unit will return to
the previous setting.
"ERROR": When the previous fax
ERROR
transmission fails and you redial
the same number.
This feature is not available for
broadcast transmission.
OFF
The calling charge may be higher.
To send a document:
1. Insert the document into the auto
document feeder.
2. Follow steps 1 and 2 above.
ON
3. Press
4. Press
5. Enter the fax number.
6. Press
7. Enter the transmission start time.
Press * to select "AM" or "PM".
8. Press
OFF
9. Press
To cancel after programming,
press
+
-
or
to select "ON".
w
.
w
.
w
.
p
.
{
w
then
.
Advertisement
Table of Contents
