Table of Contents
Advertisement
Code
Feature & Display
Setting the Caller ID list to print
automatically
#26
AUTO CALL. LIST
=ON
Setting the Distinctive Ring
pattern
#31
RING DETECTION
=OFF
Receiving other size documents
AUTO REDUCTION
=ON
#37
To receive a fax document that is
longer than your recording paper.
Changing the display contrast
#39
LCD CONTRAST
=NORMAL
Changing the fax activation code
FAX ACTIVATION
=ON
If you use an extension telephone
and wish to use it to receive a fax,
#41
activate this feature, and enter the
code (p. 48).
This code is also used to receive
a voice message and a fax in the
same call (p. 47).
Setting the memory reception
alert
RECEIVE ALERT
=ON
#44
To alert you with a beeping sound
when a document which has been
received is stored into memory due
to some existing problem.
Settings
ON
OFF
[±]
ON
OFF
[±]
ON
[±]
OFF
NORMAL
[±]
DARKER
ON /
[±]
CODE=? ? #9
OFF
ON
[±]
OFF
Features Summary
How the unit operates
"ON": The unit will print the Caller
ID list automatically after every 30
new calls (p. 30).
See page 48 for details.
"ON": The unit will fit a received
document onto your recording
paper.
"OFF": The unit will print the
original size.
"NORMAL": For normal contrast
"DARKER": Used when the display
contrast is too light.
1. Follow steps 1 and 2 on page 64.
+
-
2. Press
or
w
3. Press
.
4. Enter your code from 2 to 4 digits,
using 0–9, # and :.
w
5. Press
.
p
6. Press
Do not enter "0000".
If you are alerted by a slow
beeping sound, clear the printing
problem and make sure the unit is
supplied with enough paper to print
the stored document. The beeps
will stop.
to select "ON".
.
65
Advertisement
Table of Contents
