Table of Contents
Advertisement
Storing names and telephone numbers
into navigator
For rapid access to frequently dialled numbers, the unit provides the navigator directory
(100 entries).
Press p repeatedly until the following
1
is displayed.
Display:
Press ( or ).
2
3
Enter the name, up to 10 characters (see
page 23 for instructions).
Example:
Press w.
4
5
Enter the telephone number, up to 30 digits,
using the dial keypad.
Example:
If you want to enter a hyphen, press
è.
Press w.
6
To program other entries, repeat steps 3 to 6.
Press p to exit the program.
7
directory!
DIRECTORY SET
PRESS STATION OR
/
DIRECTORY SET
PRESS NAVI.[
I H
]
NAME=
STORE:PRESS SET
NAME=Alice
STORE:PRESS SET
NO.=
NO.=5552233
REGISTERED
!
NAME=
STORE:PRESS SET
Automatic Dialling
RECALL
(Hyphen)
Helpful hint:
You can confirm the stored entries on the
telephone number list (p. 81).
Note:
When the following is displayed in step 6, you
can store only 5 more entries.
If there is no space to store new entries, the
following is displayed in step 6. Erase
unnecessary entries (p. 28).
A hyphen or a space entered in a telephone
number counts as two digits.
To correct a mistake
Press ( or ) to move the cursor to the
incorrect character/number, and then make
the correction.
To delete a character/number
Move the cursor to the character/number you
want to delete, and press {.
MENU
SET
STOP
(Delete)
REGISTERED
SPACE= 5 DIRS.
REGISTERED
DIRECTORY FULL
27
Advertisement
Table of Contents
