Storing Names And Telephone Numbers Into Navigator Directory - Panasonic KX-FB421 Operating Instructions Manual

Storing names and telephone numbers into
navigator directory
For rapid access to frequently dialed numbers, the unit provides the navigator directory (100 entries).
{MENU}
{<} {>}
1
Press { { { { MENU} } } } repeatedly until the
following is displayed.
2
Press { { { { > > > > } } } } .
3
Enter the name, up to 10 characters (see
page 30 for instructions).
Example:
4
Press { { { { SET} } } } .
5
Enter the telephone number, up to 30
digits, using the dial keypad.
Example:
L If you want to enter a hyphen, press
{ { { { FLASH} } } } .
{FLASH} {SET}
(Hyphen)
{STOP}
(Delete)
DIRECTORY SET
PRESS STATION OR
b
DIRECTORY SET
PRESS NAVI.
NAME=
STORE:PRESS SET
NAME=Alice
STORE:PRESS SET
NO.=
NO.=5552233
Automatic Dialing
6
Press { { { { SET} } } } .
L To program other entries, repeat steps
3 to 6.
7
Press { { { { MENU} } } } to exit the program.
Helpful hint:
L For your convenience, HELP-FAX (1-800-
435-7329) has been pre-programmed. If you
cannot solve a problem, call using this entry
(page 36). If unnecessary, you can erase it
(page 35).
L You can confirm the stored entries in the
telephone number list (page 79).
Note:
L When the following is displayed in step 6, you
can store only 5 more entries.
L If there is no space to store new entries, the
following is displayed in step 6. Erase
unnecessary entries (page 35).
L A hyphen or a space entered in a telephone
number counts as two digits.
To correct a mistake
Press { { { { < < < < } } } } or { { { { > > > > } } } } to move the cursor to the
incorrect character/number, and then make the
correction.
To delete a character/number
Press { { { { < < < < } } } } or { { { { > > > > } } } } to move the cursor to the
character/number you want to delete, and press
{ { { { STOP} } } } .
REGISTERED
u
NAME=
STORE:PRESS SET
REGISTERED
SPACE= 5 DIRS.
REGISTERED
DIRECTORY FULL
33