Status Monitor Task Bar Display - Panasonic 135FP Operating Instructions Manual

Status Monitor
Task Bar Display
The Status Monitor is a MFP utility that monitors and displays the current status of connected devices.
Upon activation of Windows, the icon of the status monitor appears on the System Tray.
The Status Monitor indicates the device status by icon lamp color as listed below.
Lamp color
Green
Yellow
Red
Gray
NOTE
132
Device is operational under standby, printing, copying status.
Device inspection is required under initialization,
open cover, paper jam, etc.
Need for toner cartridge replacement, paper supply, or device failure.
Device is in off-mode.
Installing the Panasonic Document Management System adds the status monitor to
the startup menu. If the power of the device is not turned on or the parallel cable is not
connected when starting Windows, the error message shown above appears.
Verify the power source and parallel cable and then press the
Connecting the device to a network server disables the status monitor.
Status Monitor
Status
Retry button.