Page 1
EvoRad2BTA 08/53302/0 (UK) Issue 1 The product complies with the European Safety Standards EN60335-2-30 and the European Standard Electromagnetic Compatibility (EMC) EN55014, EN60555-2 and EN60555-3 These cover the essential requirements of EEC Directives 2006/95/EC and 2004/108/EC...
Page 2
LCD Display Bluetooth Neon Mode Programme Temperature Temperature Increase Decrease Heat Neon Mains neon Standby Cable wrap & plug storage Flashing Selected Heat Se ng Selected Desired Mode Temperature Manual Mode Auto Mode Time for next status change (ON at 15:20) Heat status Heat se ng Ac ve segment...
Dimplex Model : EvoRad2BTA THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE The heater is designed for operation on an AC electricity supply, and is suitable Important Safety Advice for use in domestic dwellings and similar indoor locations.
6. If required P2, P3 and P4 segment can be set up using steps 1-4 above. [c] Dimplex UK Limited All rights reserved. Material contained in this publication may not be reproduced in whole or in part, without prior permission in writing of Dimplex UK Limited.