Operator's Guide (BA)
3 Operation
3.1
User areas – Main display
Display
BA/3-20
•
Press the User Area key to display the options for selecting user
areas.
•
The user areas appear on the softkeys.
•
Press the "Continue" softkey to display further selection options.
•
When you select a user area, the name of the user area appears in
the top left-hand corner of the screen.
•
Press the User Area key again to switch between the two most
recently selected user areas.
Fig. 3-1
User area bar
Fig. 3-2
User area bar – Continue
SINUMERIK 840D/810D Configuring the OP 030 Operator Interface (FBO) – 09.01 Edition
© Siemens AG, 2001. All rights reserved
09.01