Panasonic EY4550 Service Manual page 8

Procedure 1A → 1B → 1C → 1D → 1E → 1F
Ref. No. 1G
→ 1G
Assembly of main unit.
1. Press fit the lead wire firmly.
2. Insert the LED into the hole of gear box block until all the way back.
NOTE:
Make sure the lead wires are not pulled back when placing them in
the housing rib.
3. Place the LED lead wires properly.
If failure to do, it may short-circuited with the radiating plate.
4. Close the housing A and B.
8