(a)
Base Configuration
Feeding
Output
Print Server
Multi-sheet Inserter (MSI
Scanner
Options
Feeding Options
High Capacity Feeder (letter)
1-Tray Oversized High Capacity Feeder
Advanced High Capacity Feeder
Finishing Options
IMPORTANT: Refer to Configuration Dependencies for information on configuration requirements for the finishing devices.
Offset Catch Tray (OCT)
BR Finisher
BR Booklet Finisher
Interface Module
GBC
®
AdvancedPunch Pro
Customer Expectation & Installation Guide
Press with three main trays and control panel with touch screen
(Not shown) Choice of Finishing Options
(Not shown) Choice of Print Server Options
Tray is also referred to as Tray 5 / Bypass
Mounts on top of optional 1-Tray OHCF or Advanced HCF
Maximum 250 sheet capacity
Duplex Automatic Document Feeder
Single tray, holds up to 2,000 sheets
8.5 x 11 in / A4 – Long Edge Feed (LEF)
Single tray holds up to 2,000 sheets and size up to 13 x 19.2 in
Two tray, holds up to 2,000 sheets each (4,000 total) and sizes up to 13 x 19.2 in
An additional Dual Advanced High Capacity Feeder can be optionally added to the 2-Tray
Advanced High Capacity Feeder
Holds a maximum of 500 sheets
The BR Finisher features include basic stapling and hole punching.
The BR Booklet Finisher adds saddle stitching capability
The Interface Module acts as a paper path from the press to the finishing device; it also allows
communication between the press and the finishing device. The Interface Module also cools and
decurls paper as it exits the press and before it enters the finishing device.
®
The GBC AdvancedPunch Pro is an inline die punch that utilizes modular die sets to enable a
variety of hole- punch patterns from A4/8.5 x 11 in. (LTR/letter) Long- Edge-Feed (LEF) to
12x18 or SRA3 media. LTR die punch ships with 19- hole die set; A4 die punch ships with 21-
hole die set.
Versant 80 Press