Business Ready Finisher (Br Finisher) - Xerox Versant 80 Press Installation Manual

Standard Finisher Plus Staple Tray Capacity by weight and paper finish
Paper type and weight
Coated 55-105 gsm
106-128 gsm
129-150 gsm
151-176 gsm
177-220 gsm
221-256 gsm
256-300 gsm
301-350 gsm
Interposer
The Standard Finisher Plus includes a standard Interposer, used to insert pre-printed stock into finished sets without having to go through the
print engine. Labels, coated media and envelopes are not supported.
The Interposer is also called the Post-Process Inserter, and depending on the product, it is either Tray T1 or Tray 8.
NOTE: These specifications are the same as the Standard Finisher.
Interposer Capacity by weight and paper finish
Paper type and weight
Uncoated 52-80 gsm
81-220 gsm
Hole Punching
The Standard Finisher Plus offers Hole Punching as a standard feature.
 Holes are created on the trail edge of the sheet.
 Hole punching is not available to the Booklet Tray.
 Hole punch capacity is equal to the regular capacity of the chosen output tray
 For the USA, 2- and 3-hole punching is available; for Europe, 2- and 4- hole punch is available. Stacks can be punched on the left or right side, or
on the top edge
NOTE: These specifications are the same as the Standard Finisher.
Hole Punch Capacity by weight and paper finish
Paper type and weight
Uncoated 52-220 gsm
Coated 106-220 gsm
Supported Stocks for the
Finishing Transport
Standard Finisher Plus Limitations

Business Ready Finisher (BR Finisher)

The Business Ready Finisher includes:
 Multi-position Stapling
 Hole Punch
Customer Expectation & Installation Guide
B5 / 7.25 x 10.5 in
Not supported
5
5
5
5
4
3
Not supported
B5 / 8 x 10 in
200 shts
H=22mm (0.87 in)
B5
Applicable
Applicable
When delivering sheets to a connected third-party finishing device, the Standard Finisher Plus can pass
through substrate sizes from 182 mm (7.16 in) to 488 mm
(19.2 in) in the process direction, and 182 mm (7.16 in) to 330.2 mm (13 in) in the cross-process direction,
substrate weights from 55-350 gsm (16 lb. Bond-130 lb. Cover).
Productivity may be reduced by up to 50% when running multiple sets of a single sheet job to the Stack Tray,
due to the press being forced to wait while each single sheet set is ejected to the Stacker Tray.
Paper Size
A4 / 8.5 x 11 in
Not supported
5
5
5
5
4
3
Not supported
Paper Size
A4 / 8.5 x 11 in
200 shts
H=22mm (0.87 in) H=22mm (0.87 in)
Paper Size
A4 / .5 x 11 in
Applicable
Applicable
Versant 80 Press
B4 / 8.5 x 14 in A3 / 11 x 17 in
Not supported Not supported
5
5
5
5
4
3
Not supported Not supported
B4 / 8.5 x 14 in A3 / 11 x 17 in
200 shts
H=22mm (0.87 in)
B4 / 8.5 x 14 in A3 / 11 x 17 in
Applicable
Applicable
5
5
5
5
4
3
200 shts
Applicable
Applicable