Disassembly And Replacement - Toshiba e-STUDIO350 Service Manual

5.5 Disassembly and Replacement

Note: When taking off the control panel, check the
position of the stopper; if the stopper is at
the position "b", remove the stopper or move
it to the position "a".
5
[A] Stopper
(1) Slide the stopper and pull it out.
[B] Control panel unit
(1) Take off the right upper cover and the front
upper cover (
(2) Disconnect 1 connector.
(3) Remove 3 screws and take off 3 harness
clamps.
(4) Lower the control panel and remove 6 screws.
(5) Take off the control panel unit while sliding it.
e-STUDIO350/450 CONTROL PANEL
Chapter 2.5.1 [J] [I]).
a
Fig. 5-501
Fig. 5-502
Fig. 5-503
Fig. 5-504
5 - 12
b
Stopper
November 2003 © TOSHIBA TEC