Oven Temperature Adjustment; Language; Preheating Alarm Light; Beeper Volume - LG LSE3090ST Owner's Manual

OVEN TEMPERATURE
AdJUSTMENT
You may find that your new oven cooks differently than
the one it replaced. Use your new oven for a few weeks
to become more familiar with it before changing the
temperature settings. If after familiarizing yourself with
the new oven, you still think that it is too hot or too cold,
you can adjust the thermostat yourself.
Adjusting the oven temperature
1. Press and hold the PROOF or WARM/PROOF button
for 3 seconds. "AUTO" will appear in the display.
2. Press the PROOF or WARM/PROOF button once and
"Adj" will appear in the display.
3. Using the number buttons, enter the amount you
wish to adjust the temperature.
For example, to adjust the oven temperature
15 degrees, press 1 and 5.
4. Press PROOF or WARM/PROOF once to increase (+)
or twice to decrease (-) the temperature.
5. Press the START button to accept the change.
NOTE
• This adjustment will not affect the broiling or
Self Clean temperatures. The adjustment will be
retained in memory after a power failure. The oven
temperature can be increased (+) or decreased (-)
as much as 35°F or 19°C.
• Once the temperature is increased or decreased,
the display will show the adjusted temperature
until it readjusts.

LANGUAGE

The default language of the display is English. It can be
changed to Spanish or French.
1. Press and hold the WARM/PROOF button for
3 seconds. "AUTO" will appear in the display.
2. Press the WARM/PROOF button 2 times and "Lng"
will appear in the display.
3. Press the 1 button for English, press the 2 button for
Spanish, press the 3 button for French.
4. Press the START button to accept the change.

PREHEATING ALARM LIGHT

When the oven reaches its set temperature the preheating
alarm light will flash until the oven door is opened.
You can activate or deactivate the preheating alarm light.
1. Press and hold the WARM/PROOF button for
3 seconds. "AUTO" will appear in the display.
2. Press the WARM/PROOF button 3 times and "PrE"
appear in the display.
3. Press the 1 button for ON or press the 2 button for
OFF.
4. Press the START button to accept the change.

BEEPER VOLUME

1. Press and hold the WARM/PROOF button for
3 seconds. "AUTO" will appear in the display.
2. Press the WARM/PROOF button 4 times and "BEEP"
will appear in the display.
3. Press the 1 button for LOUD, press the 2 button for
NORMAL, press the 3 button for LOW, and press the
4 button for MUTE.
4. Press the START button to accept the change.

FAHRENHEIT OR CELSIUS

The oven temperature settings can either be set to
Fahrenheit or Celsius. The oven defaults to Fahrenheit
unless changed by the user.
1. Press and hold the WARM/PROOF button for
3 seconds. "AUTO" will appear in the display.
2. Press the WARM/PROOF button 5 times and "UNIT"
will appear in the display.
3. Press the 1 button for F (Fahrenheit) or press the 2
button for C (Celsius).
4. Press the START button to accept the change.

OVEN LIGHT

The interior oven light automatically turns ON when the
door is opened. The oven light may also be manually
turned ON or OFF by pressing the OVEN LIGHT button.
NOTE
The oven light cannot be turned on if the Self Clean
function is active.
15
FEATURES