Table of Contents
Advertisement
1. Tap the Menu icon
2. Select a command from the menu by tapping it with the stylus or by
moving the analog controller
analog controller while it is centered.
Command toolbar
Command toolbar
Command toolbar
Command toolbar
The command toolbar enables you to initiate a command by tapping an icon
or writing a Graffiti 2 quick stroke instead of using the menus. Most menu
commands have an equivalent Graffiti 2 quick stroke, which is similar to
keyboard shortcuts used to execute commands on computers.
The Graffiti 2 quick stroke appears next to the command in the menu. To use
Graffiti 2 quick strokes, menus must be closed.
1. In the abc or ABC portions of the Input Area, draw the Graffiti 2 menu
command stroke (a diagonal line from the lower-left to upper-right) to
display the command toolbar.
2. Within 4 seconds, do one of the following:
•
Tap an icon that represents the command you want. The icons vary
within each application.
•
Enter a Graffiti 2 quick stroke in the Input Area. For example, to choose
Select All from the Edit menu, draw the letter S.
TIP: If you wait more than four seconds to draw the quick stroke letter, you
TIP:
TIP:
TIP:
need to redraw the menu command stroke to redisplay the command toolbar.
Int ro duct ion to your Zodiac Console
or the title bar to open the menu bar.
to highlight it and then pressing the
Learning to navigate
Using Your Zodiac Console 30 30 30 30
Advertisement
Table of Contents
