My Zodiac Won't Turn On; My Console Is Not Responding; I Did A Soft Reset And My Console Is Still Not Responding - Palm TapWave Zodiac Using Manual

My Zodiac won't turn on.

My Zodiac won't turn on. My Zodiac won't turn on. My Zodiac won't turn on.
Zodiac has a data protection mode which activates if the battery level gets
too low. Plug in the power adapter and let your Zodiac sit for about 5 minutes.
With the charger still plugged in, press the Power button to make sure your
Zodiac turns on. Let the Zodiac continue to fully charge for 2 hours.

My console is not responding.

My console is not responding. My console is not responding. My console is not responding.
You may have to perform a reset if your console no longer responds to the
buttons on the screen.
A soft reset allows your console to get a fresh start, similar to rebooting a PC.
All records and entries are retained after a soft reset.
To perform a soft reset, use the tip of your stylus (or another object without a
sharp tip such as an unfolded paper clip) to lightly press the reset button
inside the hole on the back panel of your console.
Reset
button

I did a soft reset and my console is still not responding.

I did a soft reset and my console is still not responding. I did a soft reset and my console is still not responding. I did a soft reset and my console is still not responding.
If you already performed a soft reset and you console is still not responding,
or if you received an error while performing a soft reset, you may have to
perform an extensions-off reset.
T rou bleshooting
My Zodiac won't turn on.
Using Your Zodiac Console 179 179 179 179