Table of Contents
Advertisement
Save a phone number to Contacts
You can save the number from an incoming or outgoing call to an existing
contact, or create a new contact for the number. If an incoming call uses
caller ID blocking, you cannot save the number.
1
Do one of the following:
•
Before dialing a number you entered in the dial pad: Tap
Contacts.
•
During a call: Tap
•
After a call: From the dial pad, tap
number, and tap
Add To
2
Tap one of the following:
Add New Contact:
Create a new contact for the phone number.
Add To
Existing: Tap the contact you want to add the phone number
to.
Use a phone headset
You can connect the headset that came with your phone for hands-free
operation.
WARNING
If driving while using a phone is permitted in your area, we
recommend using a headset or hands-free car kit (sold separately). However, be
aware that use of a headset that covers both ears impairs your ability to hear other
sounds. Use of such a headset while operating a motor vehicle or riding a bicycle
may create a serious hazard to you and others, and may be illegal. If you must use
a stereo headset while driving, place a speaker in only one ear. Leave the other ear
free to hear outside noises, and use the headset only if it is legal and you can do so
safely.
58
Chapter 4 : Phone
.
. Tap
to the right of the
Contacts.
Use a wired headset
Your phone works with headsets that have a 3.5mm connector (look for
three colored bands on the plug). When in doubt, ask the third-party
headset manufacturer if the product is compatible with your phone. If you
hear a headset buzz or experience poor microphone performance, your
headset may be incompatible with your phone.
1
Connect the headset. While on a call, the
Add to
2
The headset button performs different actions depending on what's
happening on the phone. Press the headset button once to perform
any of the following tasks:
•
Answer an incoming call
•
Respond to call waiting
•
Hang up a single active call or all calls on a conference call
3
If you want to stop using the headset, do any of the following:
•
Switch from the headset to your phone's speakerphone: Tap
tap Speaker.
•
Switch from the wired headset to a previously paired Bluetooth
hands-free device: Tap
•
Use your phone without the headset: Disconnect the headset.
Set up and use a Bluetooth
Your phone is compatible with many headsets and car kits (sold separately)
enabled with Bluetooth
Stereo (with AVRCP media controls).
icon changes to
and tap the device name.
hands-free device
®
wireless technology version 2.1, with EDR and
®
.
and
®
Advertisement
Table of Contents
