Charge The Battery - Palm Pre P100EWW User Manual

Palm cell phone user guide
Hide thumbs Also See for Pre P100EWW:
Table of Contents

Advertisement

Although you create a Palm profile by entering a valid email address, setting
up a Palm profile is different from setting up email on your phone. To set up
email, see
Set up
email. To change your Palm profile information after you
have set it up, see
Update your Palm profile

Charge the battery

When the battery is very low, the
battery
of the screen changes to red. When the battery is fully charged, the icon
appears full and changes to green
WARNING
Use only batteries and chargers that are approved by Palm with your
phone. Failure to use a battery or charger approved by Palm may increase the risk
that your phone will overheat, catch fire, or explode, resulting in serious bodily
injury, death, or property damage. Use of unapproved third-party power supply
accessories may damage the device and void the warranty for the product.
Although the battery may come with a sufficient charge to complete the
setup process, we recommend that after setup you charge your phone until
the battery
icon in the upper-right corner of the screen is full to ensure
that the battery is fully charged.
See
Maximizing battery life
for tips on making your battery's power last
longer.
settings.
icon in the upper-right corner
.
1
On the right side of your phone, open the
connector. This is easier to do if you slide the keyboard out first.
2
Connect the small end of the
connector.
3
Connect the other end of the
4
Plug the
AC charger
into a working outlet.
charger/microUSB
USB cable
to the
charger/microUSB
USB cable
to the
AC
charger.
Chapter 2 : Basics
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pre

Table of Contents