Using Flash mode during a call
Flash mode enables you to manually
manage your calls while one or more calls
are active. This mode is often used during a
conference call when one of the calls has
ended but the other remains connected.
1 Press Send
View.
2 If the Do you want to switch to Flash
mode prompt appears, select Yes.
3 While in Flash mode, do any of the
following:
If you have one call in progress and
•
answer an incoming second call,
press Send
the calls.
from Active Call
to swap between
If you have one call in progress, to
•
make an outgoing second call, dial the
number using any of the methods
described in Making calls.
If you have one call in progress and
•
place an outgoing second call, press
Send
after establishing a
connection with the second party to
set up a conference session using
three-way calling.
If you have two calls in conference,
•
press Send
the calls; you can then dial another
number and place the new caller into
the conference session.
4 To exit Flash mode and end all the calls,
press Power/End
Forwarding calls
Please check with Verizon Wireless about
availability and pricing of forwarding calls to
another phone; call forwarding is not
available in all areas, and additional charges
may apply.
1 Press Phone
2
Enter *72 followed by the number
where you want to forward your calls.
W H A T C A N I D O W H E N I ' M O N A C A L L ?
Y O U R P H O N E
to hang up one of
.
.
3
57