Table of Contents
Advertisement
will ensure that the safety of the tool
is maintained.
Safety Warnings
1.
Maintain labels and nameplates on
the tool. These carry important safety
information. If unreadable or missing,
contact Harbor Freight Tools for a
replacement.
2.
Place securely on Iron Holder (6)
when not in use.
3.
Keep away from flammable objects.
4.
Do not overheat adhesive.
5.
When using a handheld tool, maintain
a firm, controlling grip on the tool.
6.
Do not leave the tool unattended
when it is plugged into an electrical
outlet. Unplug the tool from its
electrical outlet and allow to cool
down before leaving.
7.
This product is not a toy. Keep it out
of reach of children.
8.
Any power cord must be properly
grounded. Ground Fault Circuit
Interrupter (GFCI) should also be
implemented – it prevents sustained
electrical shock.
9.
WARNING: The cord of this product
contains lead, a chemical known
to the State of California to cause
cancer, and birth defects or other
reproductive harm. Wash hands
after handling. (California Health &
Safety Code § 25249.5, et seq.)
10. The warnings, precautions,
and instructions discussed in
this instruction manual cannot
cover all possible conditions and
situations that may occur. It must
Item 62133
For technical questions, please call 1-888-866-5797.
be understood by the operator that
common sense and caution are
factors which cannot be built into this
product, but must be supplied by the
operator.
SAVE THESE
INSTRUCTIONS.
GROUNDING
TO PREVENT
ELECTRIC SHOCK
AND DEATH FROM
INCORRECT GROUNDING
WIRE CONNECTION:
Check with a qualified
electrician if you are in doubt
as to whether the outlet is
properly grounded. Do not
modify the power cord plug
provided with the tool. Never
remove the grounding prong
from the plug. Do not use the
tool if the power cord or plug
is damaged. If damaged, have
it repaired by a qualified
service technician before use.
If the plug will not fit the
outlet, have a proper outlet
installed by a qualified
electrician.
Page 4
Advertisement
Table of Contents
