Specifying The Color Mode And Resolution - Canon ImageRUNNER 2545i Sending And Facsimile Manual

Specifying the Color Mode and Resolution

You can specify the color mode and resolution of scanned originals for sending.
The color mode setting enables you to select whether to scan originals in
black-and-white or color. The resolution setting enables you to send documents
with fine text and images clearly by changing resolution from low to high. The
higher the resolution, the higher the output quality, but the longer the sending time.
3
NOTE
The default settings are:
- Color Mode: 'B&W'
- Resolution: '200 × 200 dpi'
1
Press
destination.
NOTE
• For instructions on how to place your originals, see Chapter 2, "Basic Operations," in
the Reference Guide.
• For instructions on how to specify the destination, see "Basic Sending Methods," on
p. 2-2, or Chapter 4, "Specifying Destinations Easily and Quickly."
2
IMPORTANT
• The following combinations of file format and preset scan modes are not available:
- [JPEG], [PDF (Compact)], or [PDF (Compact+OCR)] as the file format and [B&W
- [TIFF] as the file format and [Color 300 × 300 dpi] as the scan mode
• [Color 300 × 300 dpi] is not available when sending I-faxes or faxes.
3-2

Specifying the Color Mode and Resolution

(SEND) ➞ place your originals ➞ specify the
200 × 200 dpi] or [B&W 300 × 300 dpi] as the scan mode
Press [Scan Settings] ➞ select
the desired mode from the three
preset scan modes.
Preset scan modes consist of color mode
and resolution settings.