Switching Temporarily To Tone Dialing - Canon ImageRUNNER 2545i Sending And Facsimile Manual

4
Specify the scan settings, send settings, and press
send documents.
NOTE
For the basic procedures for sending documents, see "Basic Sending Methods," on
p. 2-2.

Switching Temporarily to Tone Dialing

Many fax information services for banks, airline reservations, hotel reservations,
etc., require tone dialing for their services. If your machine is connected to a rotary
pulse line, follow the procedure below to set the machine temporarily for tone
dialing.
1
Press
2
3
(SEND).
Press [New Address] ➞ [Fax].
NOTE
If Fax Send is set to 'Do not allow',
[Fax] is not displayed. (See Chapter 4,
"Customizing Settings," in the Remote
UI Guide.)
Press [Hook].
IMPORTANT
If the machine is in the Department ID
Management with the optional Copy
Card Reader-F1, do not remove the
control card. Removing the card
results in the disconnection of the line.
Advanced Sending Methods
(Start) to
2
2-41