Yamaha F225 Owner's Manual page 91

13. Leave the outboard motor for 5-10 min-
utes.
14. Remove the oil dipstick and wipe it
clean.
1. Oil dipstick
15. Insert the dipstick and remove it again.
Be sure to completely insert the dipstick
into the dipstick guide, otherwise the oil
level measurement will be incorrect.
16. Recheck the oil level using the dipstick
to be sure the level falls between the up-
per and lower marks. Consult your
Yamaha dealer if the oil level is out of
specified level.
1
1. Oil dipstick
2. Upper mark
3. Lower mark
17. Start the engine and make sure that the
low oil pressure-alert indicator remains
1
ZMU07157
2
3
ZMU06918
off. Also, make sure that there are no oil
leaks. NOTICE: If the low oil pressure-
alert indicator comes on or if there
are oil leaks, stop the engine and find
the cause. Continued operation with
a problem could cause severe engine
damage. Consult your Yamaha dealer
if the problem cannot be located and
corrected.
[ECM01622]
18. Install the apron on the starboard side as
shown in the illustration.
1
1. Apron
19. Apply LOCTITE 572 to the threads of the
bolts and then install the bolts.
Maintenance
ZMU07960
84