Yamaha F225 Owner's Manual page 87

quickly.
To prevent spilling oil where it could cause
damage to nature, it is strongly recommend-
ed that you use an oil changer to change the
engine oil. If an oil changer is not available,
drain the engine oil by removing the drain
screw. If you are not familiar with the proce-
dure for changing the engine oil, consult your
Yamaha dealer.
Changing the engine oil using an oil changer
(recommended)
1. Put the outboard motor in an upright po-
sition (not tilted). NOTICE: If the out-
board motor is not level, the oil level
indicated on the oil dipstick may not
be accurate.
[ECM01861]
2. Start the engine. Warm it up and keep
the idle speed for 5-10 minutes.
3. Stop the engine and leave it for 5-10
minutes.
4. Remove the top cowling.
5. Remove the oil filler cap.
1. Oil filler cap
6. Remove the oil dipstick.
1. Oil dipstick
7. Insert the tube of the oil changer into the
ZMU05843
oil dipstick guide, and then extract the
engine oil completely.
1. Oil changer
8. Add the correct amount of oil through the
Maintenance
1
1
1
ZMU06951
ZMU07157
ZMU07184
80