Yamaha DRAG STAR XVS125 Owner's Manual page 68

2
1
1. Front wheel axle pinch bolt
2. Wheel axle
2. Loosen the front wheel axle
pinch bolt, then the wheel axle.
3. Lift the front wheel off the ground
according to the procedure on
page 6-37.
4. Pull the wheel axle out, and then
remove the wheel.
cC
Do not apply the brake after the
wheel has been removed together
with the brake disc, otherwise the
brake pads will be forced shut.
PERIODIC MAINTENANCE AND MINOR REPAIR
1. Speedometer gear unit
To install the front wheel
1. Install the speedometer gear unit
into the wheel hub so that the
projections mesh with the slots.
2. Lift the wheel up between the
fork legs.
ECA00048
1
1. Retainer
EAU03832
NOTE:
Make sure that there is enough
space
before inserting the brake disc and
that the slot in the speedometer gear
unit fits over the retainer on the fork
leg.
6-38
between the brake
3. Insert the wheel axle from the left
side.
4. Lower the front wheel so that it is
on the ground.
1
2
1
3
4
5
pads
6
7
8
9