Yamaha DRAG STAR XVS125 Owner's Manual page 41

PERIODIC MAINTENANCE AND MINOR REPAIR
1
2
3
1. Oil filter element
4
2. O-ring
5. Remove and replace the oil filter
5
element and O-ring.
6. Install the oil filter element cover
by installing the bolts, then tight-
6
ening them to the specified
torque.
7
Tightening torque:
8
Oil filter element cover bolt:
10 Nm (1.0 m·kg)
9
NOTE:
Make sure that the O-ring is properly
seated.
7. Install the engine oil drain bolt,
and then tighten it to the speci-
2
fied torque.
1
Tightening torque:
Engine oil drain bolt:
23 Nm (2.3 m·kg)
8. Add the specified amount of the
recommended engine oil, and
then install and tighten the oil
filler cap.
cC
6-11
Recommended oil:
See page 8-1.
Oil quantity:
With oil filter element
replacement:
1.6 L
Without oil filter element
replacement:
1.4 L
Total amount (dry engine):
1.75 L
8 In order to prevent clutch slip-
page (since the engine oil also
lubricates the clutch), do not
mix any chemical additives
with the oil or use oils of a
higher grade than "CD". In
addition, do not
labeled "ENERGY CONSERV-
ING II" or higher.
8 Make sure that no foreign
material enters the crankcase.
EC000072
use oils