Recording Your Performance (Phrase Recording) - Yamaha YPT255 Owner's Manual

Recording Your Performance (Phrase Recording)

You can record your performance as a User Song (Song number 103), which can then
be played back on the instrument.
NOTE
• A total of approximately 300 notes can be recorded to the User Song.
1
Select the desired Voice.
2
Press the [PHRASE REC] button to
enable the Record mode.
UserSong
001
To exit from the Record mode, press the
[PHRASE REC] button again. (The display stops
flashing.)
NOTICE
• If the User Song is recorded, the data will be recorded
over and erased (you will record over and erase previ-
ous data in "User Song").
3
Play the keyboard to start recording.
NOTICE
• Never attempt to turn the power off or connect or dis-
connect the AC adaptor. Doing so can result in a loss
of data.
NOTE
• When recording capacity becomes full during recording,
a "Mem Full" message appears on the display, record-
ing is stopped, and the Song select display is shown.
• If you press the [START/STOP] button, even if you don't
play the keyboard, recording starts.
Limitations while recording:
• The following settings/operations cannot be
recorded: Reverb Level, Style, metronome
click, Transpose, Tuning.
• The following settings and buttons are not avail-
able, or if operated, the new settings cannot be
recorded:
Split Point, Reverb Type, Chorus Type,
[FUNCTION] button, [PORTABLE GRAND]
button.
4
Press the [START/STOP] button to stop
recording.
5
To play back the recorded Song, press
the [START/STOP] button.
NOTE
• If you make a mistake or want to erase an existing Song,
you can delete the User Song. To do this, enable the
Record mode in step 2, and then press the [START/
STOP] button twice in succession (without playing the
keyboard).
Flashes
PSR-E253/YPT-255 Owner's Manual
29