Brake Light Switches; Checking The Front Brake Pads And Rear Brake Shoes - Yamaha YBR125ED Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT

Brake light switches

1. Rear brake light switch
2. Rear brake light switch adjusting nut
6
The brake light, which is activated by
the brake pedal and brake lever,
should come on just before braking
takes effect. If necessary, adjust the
rear brake light switch as follows, but
the front brake light switch should be
adjusted by a Yamaha dealer.
1. Remove panel A. (See page 6-7.)
2. Turn the rear brake light switch
adjusting nut while holding the
rear brake light switch in place. To
make the brake light come on ear-
lier, turn the adjusting nut in direc-
tion (a). To make the brake light
EAU22295
come on later, turn the adjusting
nut in direction (b).
3. Install the panel.
6-19
Checking the front brake pads
and rear brake shoes
The front brake pads and the rear
brake shoes must be checked for wear
at the intervals specified in the periodic
maintenance and lubrication chart.
Front brake pads
1. Brake pad wear indicator groove
Each front brake pad is provided with
wear indicator grooves, which allow
you to check the brake pad wear with-
out having to disassemble the brake.
To check the brake pad wear, check
the wear indicator grooves. If a brake
pad has worn to the point that the wear
EAU22382
EAU22431