Operation And Important Riding Points; Starting The Engine - Yamaha YBR125ED Owner's Manual

OPERATION AND IMPORTANT RIDING POINTS

Read the Owner's Manual carefully to
become familiar with all controls. If
there is a control or function you do not
understand, ask your Yamaha dealer.
WARNING
Failure to familiarize yourself with
the controls can lead to loss of con-
trol, which could cause an accident
5
or injury.
EAU15952
TIP
This model is equipped with a lean an-
gle sensor to stop the engine in case of
a turnover. To start the engine after a
EWA10272
turnover, be sure to turn the main
switch to "OFF" and then to "ON". Fail-
ing to do so will prevent the engine
from starting even though the engine
will crank when pushing the start
switch.
EAU45311

Starting the engine

In order for the ignition circuit cut-off
system to enable starting, one of the
following conditions must be met:
 The transmission is in the neutral
 The transmission is in gear with
1. Turn the key to "ON".
NOTICE
If the warning light does not come
on initially when the key is turned to
"ON", or if the warning light remains
on, see page 3-2 for the warning
light circuit check.
2. Shift the transmission into the
5-1
position.
the clutch lever pulled and the
sidestand up.
See page 3-11 for more informa-
tion.
The engine trouble warning light
should come on for a few sec-
onds, then go off.
neutral position. The neutral indi-
cator light should come on. If not,
ask a Yamaha dealer to check the
electrical circuit.
EAU43187
ECA16712