Dimm Slot Locations; System Maintenance Switch - HP StoreEasy 1000 Administrator's Manual

Item
24
25
26
27
28
29
30
X
1
The PCIe expansion slots 5-7 are associated with processor 2.

DIMM slot locations

DIMM slots are numbered sequentially (1 through 8) for each processor. The supported AMP
modes use the letter assignments for population guidelines.
The arrow points to the front of the server.

System maintenance switch

Position
S1
S2
S3
S4
S5
S6
20 HPE StoreEasy 1000 Storage
Description
SATA 6Gb/s connector 4
SATA 6Gb/s connector 5
Power pass-through board connector
Internal USB 3.0 connector
SATA x4 connector 1
Rear drive cage backplane power connector
Front USB 2.0 connector
System maintenance switch
Default
Off
Off
Off
Off
Off
Off
Function
Off = iLO 4 security is enabled.
On = iLO 4 security is disabled.
Off = System configuration can be
changed.
On = System configuration is locked.
Reserved
Reserved
Off = Power-on password is enabled.
On = Power-on password is disabled.
Off = No function
On = ROM reads system configuration
as invalid.