HP StoreEasy 1000 Administrator's Manual page 58

NOTE:
number of physical network interfaces that you select. For example, if you select two interfaces
for configuration, two rows will appear for team creation.
3. Click Next.
The network interfaces that are not included in any team are displayed.
4. Select the network interfaces that you want to include in the new team.
5. Click Next to proceed to the Network VLAN configuration step.
The Network Team Configuration window also enables you to delete an existing team by
selecting the Delete check box. The Delete check box is enabled only if a team exists. When
you delete an existing team, the physical network interface included in that team can be used
for new teams.
NOTE: When a team is created, a default virtual network interface is also created. To remove
the default virtual interface, assign one or more VLAN IDs on the Network VLAN Configuration
window and select the remove the default virtual network interface check box.
While creating network teams, the interfaces claimed by one team cannot be added to any other
team. The team that these interfaces belong to is displayed next to the interface name. If all
adapters are already claimed by one or more teams, a warning message is displayed. You can
either go back and remove some interfaces from the previously created teams or skip the creation
of a team.
If some of the physical network interfaces included in the team are disconnected while other
interfaces are connected, the team status is displayed as degraded.
If all physical network interfaces included in the team are disconnected, the team status is
displayed as disconnected.
The network teams are displayed in the interface pane when you proceed to the IP Address
Configuration step.
Use the network configuration tool to configuring network interfaces.
58 Managing HPE StoreEasy 1000 Storage
The number of teams displayed for configuration or deletion depends on the